Product

Contact us

Shandong Fengtu IOT Technology Co., Ltd

Sales Manager:Ms. Emily Wang

Cel,Whatsapp,Wechat:+86 15898932201

Email:info@fengtutec.com

Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China

location:Home>Products>Road Weather Station>Roadside Weather Stations>Road Surface Condition
Road Surface Condition

Road Surface Condition

Model:FT-LMZK2

Brand:fengtu

Road Surface Condition uses advanced sensors and monitoring equipment to monitor the water, ice and snow thickness of the road surface in real time.

1.Road Surface Condition Product Introduction

Road Surface Condition uses advanced sensors and monitoring equipment to monitor the water, ice and snow thickness of the road surface in real time.The road condition monitoring station uses remote sensing technology to avoid damage to the road, thus preventing interference with traffic caused by installing a road weather station.

In road conditions where buried road sensors are inconvenient or impossible to install, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is safe and convenient. It requires little maintenance and is an ideal choice in the composition of road weather systems.

It can be installed on an existing weather station or on other buildings with an unobstructed view of the road.

Multispectral measurement technology enables accurate detection of the thickness of ice, snow and water on the road surface.

By providing road condition information, accurate monitoring data is provided to road management departments, allowing them to take response measures before road safety is in danger.

2. Road Surface Condition System Composition: Road Surface Condition Sensor, Collector, Pole Bracket, Power Supply System, Cloud Platform

3. Road Surface Condition Product Application

1. Install the bridge deck at a distance

2. Accident-prone areas

3. Areas with heavy traffic

3. Areas prone to rain and snow

4. Road Surface Condition Product Features

1. Long-distance measurement of road surface water, ice and snow

2. Measure road surface conditions

3.Measure the degree of water accumulation, ice surface and slippery

4. Non-flush design

5. Anti-corrosion

6. Infrared detection up to 15 meters

7. No need to close the lane, simple installation and maintenance

8. Rugged design, all-weather measurement

5. Road Surface Condition Technical Parameters

Monitoring distance2-15 meters
Detection diameter23cm
angle30-90 degrees
Power Input220VAC, 24VDC
Maximum power consumption5W (including lens heating)
Operating temperature-38ºC to +70ºC
Operating humidityDegree 0 to 100%
Road surface condition parameter outputThickness of road surface water: 0.00-10mmResolution: 0.01mmAccuracy: 0.1mm
Road ice thickness: 0.00-10mm
Snow thickness on the road: 0.00-10mm
Road slipperiness: 0.00-1Resolution: 0.01
(*) Road surface temperature: -38ºC to +60ºC
(*) Road humidity: 0-100%
(*) Ambient temperature and humidity: -40°C to +70°C
(*) Atmospheric pressure: 150-1100hPa
Road Condition ReportDry, damp, wet, snow, ice, ice and water mixture (sunscreen)
Lens contamination detectionOptical lens pollution level measurement and internal automatic pollution compensation
Pavement materialsConcrete, asphalt pavement
communicationRS485, RS232
MTBF10 years
SafetyNo safety issues – infrared remote sensing measurement technology
Hello, my friend!What kind of support do you need? Our products is sure to satisfy you.
*Name
*Email
Phone
Country
*Message