Zibo Bowang Mining Beta-ray Dust Detector Project

Zibo Bowang Mining purchased our β-ray dust detection instrument, the following is the actual picture of the site installation:

Beta-ray dust detector, model FT-YC01, is a high-precision dust online monitoring system launched by Windway Technology. Based on the working principle of beta ray absorption method -

C-14 is used as the emission source, which emits constant high energy electrons, the sample air passes through the inlet tube at a constant flow rate through the cutter, and the particles are trapped on the filter membrane.The energy of the beta rays attenuates when it passes through the filter membrane, and the mass of the particles is calculated through the measurement of the attenuation amount, and the concentration of the particles in the ambient air in the actual state is calculated based on the sampling flow rate, the sampling time, and the area of the filter membrane.

Advantages:

1)Using intelligent heating technology to dynamically heat and dehumidify the sampling air to improve measurement accuracy.

2) Using PID constant flow algorithm, the pump speed regulation is adaptive to ensure stable and accurate sampling air flow.

3) Using five-stage calibration method to ensure that PM10 concentration can be measured accurately regardless of the level.

4) The use of full zero calibration, to ensure that each measurement is not affected by the uniformity of the filter paper.

5) Continuously adjustable sampling period, minimum period of 3 minutes, maximum period of 60 minutes.

6) Support paper-saving mode, the filter paper can be recycled according to the use of the situation, can effectively extend the use of filter paper time.

7) Support local data query display, can query any time period data.

8)Support wired network communication and 4G wireless communication.

9)Support remote system upgrade and parameter setting.

10)Support local data storage, data storage time up to 365 days.