Product

Contact us

Shandong Fengtu IOT Technology Co., Ltd

Sales Manager:Ms. Emily Wang

Cel,Whatsapp,Wechat:+86 15898932201

Email:info@fengtutec.com

Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China

location:Home>Products>Photovoltaic Inspection>Series power supply>EL series of DC power supply
EL series of DC power supply

EL series of DC power supply

Model:FT-150030

Brand:fengtu

EL series of DC power supply EL Series of DC power Supply meets the high voltage requirements of EL testing with high output voltage.

1.EL series of DC power supply product introduction

EL series of DC power supply EL Series of DC power Supply meets the high voltage requirements of EL testing with high output voltage.EL series of DC power supply is developed by our company for the reverse power-on characteristics of photovoltaic power station strings. It converts AC power into DC power and inputs it into the solar panels to stimulate electroluminescence, thereby conducting internal defect tests on EL.

FT-150030 is a research and development type program-controlled power supply, which controls the electrical performance and safeguards of EL series of DC power supply through program software system. Its pro version is a high-quality software configuration, using higher quality imported electronic components with open programming host, which can better guarantee the stability and safety of string detection.

2. Technical parameters of EL series of DC power supply

1. ELEL series of DC power supply for photovoltaic

SpecificationFT-150030FT-150050FT-150010
Power parameters0~1500V; 0~3A0~1500V; 0~5A0~1500V; 0~10A
qualityProgrammable linear domesticProgram-controlled custom importProgram-controlled custom import
ScenesEL detector single block/string testEL detector single block/string testEL detector + drone EL test
Voltage output0~1500V0~1500V0~1500V
Voltage accuracy1V0.001V0.001V
Compensation voltage12V96V96V
Current output0~3A0~5A0~10A
Current accuracy0.1A0.001A0.001A
Power accuracy±0.1A; ±1V±0.001A; ±0.001V±0.001A; ±0.001V
Power Output0~4.5KW0~8KW0~16KW
Power stability±0.1%±0.002%±0.002%
Output accuracy±0.1%±0.001%±0.001%
Output efficiency>80%>95%>95%
Output Line Regulation±0.5%±0.005%±0.005%
Output load regulation±0.5%±0.005%±0.005%
Input voltage220VAC380VAC380VAC
Input frequency50/60Hz50/80Hz50/100Hz
Input Power Factor>0.75>0.5>0.5
Power-on timeManual controlProgram-controlled timing automatic power on and power off
Insulation withstand voltage input to output2500VDC
Insulation withstand voltage output to shell500VDC
OVP adjustment range0-100% front panel adjustment (or digital interface)
OVP regulation accuracy±1% rated value

2. ELEL series of DC power supply/programmable control system

SpecificationFT-150030FT-150050FT-150010
Programmable control systemControl current and voltage output and monitor power supply working statusThe program control panel can directly set various program control indicators of the power supply
Programmable remote interfaceRS-485C, analog interface (0-10V)
Programmable control panel-The power panel can be programmed to control the power on and off time, timed power on, protection threshold, etc.
Reverse current protection-The reverse current impedance threshold can be set to prevent string current backflow
Short circuit protectionPV string reverse connection short circuit protection to prevent PV module diode breakdown
Program-controlled buffer protection-Cache-type photovoltaic groups are disconnected in series to prevent large currents from directly penetrating the photovoltaic panels
Program-controlled steady-state output-Adaptively match current and voltage according to different power components in the string (avoid breakdown of component diodes)
Digital voltage programming accuracy-±0.001%±0.001%
Digital current programming accuracy-±0.001%±0.001%
Programmable rise time-0~10s can be set
Programmable fall time-60ms (no load); 250ms (load 10%); 2.5s (full load)
Voltage fluctuation control0.1V/ms~10V/ms0.001V/ms~0.002V/ms
Current fluctuation control0.1A~0.2A0.001A~0.01A, or 1NF
Minimum time for fluctuation control5ms0.1ms
Panel DisplayDigital display insulation control panelHost control panel
Panel Control-The power supply current and voltage protection limit value OVP can be set
Photovoltaic EL power-on characteristicsHigh and low current switching test (manual switching)High and low current switching test (programmed automatic switching)
Number of components powered on simultaneouslyCan simultaneously complete the detection and power supply access of 1 to 32 photovoltaic panels (within 1500V)
Photovoltaic power access portCombiner Box / Inverter / String Port / Module Port
Steady-state output module-Stable power-on: The power parameters of each component in the string are consistent on average (to prevent photovoltaic panel breakdown)
Constant temperature control moduleAir cooling for continuous heat dissipation and temperature controlElectronic temperature control at 45°C ensures 24-hour uninterrupted operation
Overload protection-The overload threshold can be set, and the output will stop automatically when overloaded to prevent the power supply transformer from being burned.
Output short circuit automatic protectionProtect against power failure and personal danger caused by power station line or component string disconnection, and the power supply is automatically cut off
Input voltage automatic protection-Can protect power supply components from burning out due to excessive input voltage fluctuations
Phase loss protectionCan protect against power damage and accidents caused by three-phase circuit breaker
Internal overheat protectionDynamically dissipate heat according to the internal temperature to ensure that the power supply will not burn out due to overheating
High voltage isolation protectionEnsure the safety of high voltage electrical work for operators of the whole machine casing and panel
Input Line2 meters (6 square meters)
WiringAC220Three-phase three-wire + ground wire
volume and weight430x88x450mm; 13kg17kg26kg

Note: EL series of DC power supply is a high-power DC output power supply, which is a high-voltage equipment. The program control system is customized for photovoltaic power station scenarios, which can better ensure the safety of on-site manual construction. However, high-voltage equipment is still a high-risk equipment. Please strictly follow the operating instructions and standardize wiring and operation. In the event of power protection, contact the manufacturer as soon as possible to solve the problem. Do not operate the wiring without authorization to prevent danger! ! !

Hello, my friend!What kind of support do you need? Our products is sure to satisfy you.
*Name
*Email
Phone
Country
*Message