Dust Monitoring System

Technical indicators: TSP, PM2.5, PM10 are all the same, each unit can only measure one parameter

1. Introduction to Dust Monitoring System

Dust Monitoring System uses advanced air sampling technology to continuously and reliably monitor dust levels in ambient air.

Dust Monitoring System (β-ray) uses the β-ray method to monitor the concentration of atmospheric particulate matter.The implementation standards of this product are as follows:

HJ/T 374—2007 Technical requirements and test methods for total suspended particulate matter samplers

HJ/T 93-2013 Technical requirements and test methods for environmental particulate matter (and) samplers

HJ 1100-2020 Technical Guidelines for Automatic Monitoring of Particles (and) Beta Rays in Ambient Air

2.Dust Monitoring System Working Principle

The working principle of the beta ray absorption method is adopted.C-14 is used as the emission source, which emits constant high-energy electrons.The sample air passes through the sample inlet tube at a constant flow rate through the cutter, and the particles are retained on the filter membrane.When the beta ray passes through the filter membrane, the energy decays.The mass of the particles is calculated by measuring the attenuation amount.The concentration of particles in the ambient air under actual conditions is calculated based on the sampling flow, sampling time and filter membrane area.The equipment is suitable for online monitoring of particles in construction sites, road construction, factory boundaries, etc.

3.Dust Monitoring System Functions and Features

1) Use intelligent heating technology to dynamically heat and dehumidify the sampled air to improve measurement accuracy.

2) Using PID constant flow algorithm, the pump speed is adaptively controlled to ensure stable and accurate sampling air flow.

3) Use the five-level calibration method to ensure accurate measurement of PM10 concentration regardless of high or low concentrations.

4) Use full-range zero-point calibration to ensure that each measurement is not affected by the uniformity of the filter paper.

5) The sampling period is continuously adjustable, with a minimum period of 3 minutes and a maximum period of 60 minutes

6) Supports paper saving mode, the filter paper can be recycled according to usage, which can effectively extend the use time of the filter paper.

7) Supports local data query and display, and can query data for any time period.

8) Support wired network communication and 4G wireless communication

9) Support remote system upgrade and parameter setting

10) Support local data storage, the data storage time can reach 365 days.

4.Dust Monitoring System product appearance

5.Dust Monitoring System Technical Specifications

1) Mechanical particle cutter to achieve precise cutting of particle size.

2) Use intelligent heating technology to dynamically heat and dehumidify the sampled air to improve measurement accuracy.

3) Using PID constant flow algorithm, the pump speed is adaptively controlled to ensure stable and accurate sampling air flow.

4) Use the five-level calibration method to ensure accurate measurement of PM10 concentration regardless of whether it is high or low.

5) Use full-range zero-point calibration to ensure that each measurement is not affected by the uniformity of the filter paper.

6) The sampling period is continuously adjustable, with a minimum period of 3 minutes and a maximum period of 60 minutes

7) Supports local data query and display, and can query data for any time period.

8) Support wired network communication and 4G wireless communication

9) Support remote system upgrade and parameter setting

10) Support local data storage, the data storage time can reach 365 days.

11) 7-inch LCD display, direct on-site setting operation and system settings.

12) It has the function of fog cannon linkage, and can control the opening and closing of fog cannon and other treatment equipment by setting the linkage threshold.

13) Can store 12 months of minute data and copy via USB flash drive.

14) It has sampling pipeline and relative humidity calibration functions, effectively suppressing the influence of humidity on the measurement results.

Dust Monitoring System System Composition

The system is mainly composed of particulate matter and meteorological monitoring units, data acquisition and processing units, video character overlay units, data transmission units, data display platforms, linkage control units, etc., which can realize functions such as construction site environment monitoring, data upload, data display, statistical analysis, video overlay, etc., and perfectly connect to the government monitoring platform to achieve 24-hour supervision of the construction site environment.

1.Particle monitoring unit

Continuously and automatically monitor PM10, collect environmental data once an hour, and upload it to the data center and monitoring platform for statistics in real time

and analytics;

2.Meteorological five-parameter monitoring unit

The whole set of equipment is capable of monitoring environmental parameters such as temperature, humidity, wind speed, wind direction, and atmospheric pressure, and provides meteorological parameters for the later analysis of monitoring data;

3.Data acquisition and processing unit

This unit is the core of the whole system, which is responsible for judging, checking and storing the collected monitoring data;

It is required to conduct statistical analysis and processing, report the processed data to the cloud platform, and control the local display of parameters to achieve the integration of environmental parameters and video surveillance images;

4.Data display platform

The monitoring data of this system can not only be reported to the data cloud platforms of governments at all levels, but also to the Fengtu Instrument Beta Ray Online Monitoring Platform.It can also be integrated with the on-site monitoring video, and the on-site environmental parameters can be displayed in the form of characters on the video monitoring screen, realizing the integration of local environmental parameters and local video.The data is stored together with the video to prevent tampering and exists permanently once superimposed.

Dust Monitoring System main components:

1.Equipment main box: dustproof, windproof, rainproof and sunproof;

2.Particle sampling head: physical cutter + heating dehumidifier + water vapor condenser

3.Industrial main control board + 7-inch touch screen: equipment system operation and operation

4.Particle sensor: Light scattering PM10 sensor

5.Temperature and humidity sensor: detects ambient temperature and humidity

6.Wind speed and direction sensor: meteorological data monitoring

7.Data transmission module: wireless acquisition and transmission module

8.Integrated circuit board: highly integrated, unified output

9.Power supply system: power supply, circuit breaker, grounding wire

10.Bracket: 1.6m outdoor fixed rectangular bracket

11.Outdoor P10 LED display, 96×48 dot matrix (can be customized as required).

Weather monitoring unit

The whole set of equipment is capable of monitoring environmental parameters such as atmospheric pressure, temperature, humidity, etc.The later analysis of the data provides meteorological parameter guarantee.

temperature:

Measuring range: -45～80℃;

Resolution: 0.1℃;

Accuracy: ±0.5℃;

humidity:

Measuring range: 0～100%; Accuracy: ±3%;

Resolution: 1%;

Wind speed: Measuring principle: Mechanical

Measuring range: 0~30m/s Starting wind speed: ≥0.8m/s

Accuracy: ±(0.3+0.03V) (V: wind speed)

wind direction:

Measuring principle: Mechanical Measuring range: 8 directions

Starting wind speed: ≥0.8m/s Accuracy: ±3 degrees Response and stability: ≤1min

Air Pressure:

Measuring principle: Semiconductor

Measuring range: 300-1200hPa

Resolution: 0.1hpa

Accuracy: ±0.3hpa

Response and stability: ≤1min

Main technical features of the equipment

1.Have passed CPA and CCEP certification and have certification certificates.

2.Work normally in the environment range of -30~60℃, 0~90%RH (no condensation)

3.According to customized requirements, the equipment can expand other monitoring interfaces on the box

4.Mechanical particle cutter to achieve precise cutting of particle size

5.PID constant flow algorithm ensures constant sampling flow and correct cutting curve

6.It has sampling pipeline and relative humidity calibration functions, effectively suppressing the influence of humidity on the measurement results; built-in unique optimization algorithm to improve the accuracy of the instrument's measurement results

7.7-inch LCD display, direct on-site setting operation, system settings

8.Support remote upgrade of product firmware and modification of product configuration, no need for on-site operation, saving time and effort

9.Support 4G/network port/WIFI communication to ensure real-time data transmission

10.Equipped with all-weather outdoor sensors to continuously monitor noise and meteorological parameter values

11.The default upload is according to HJ212 standard, and it can also be uploaded according to any customized protocol according to the customer platform requirements.

Dust Monitoring System product installation example